Where can I use the Tidal Joy?
The Tidal Joy is suitable for lakes, bays, flat water and pools.
What areas should I avoid using Tidal Joy in?
- Surf zones, rivers, strong currents, or offshore winds.
- Storms, lightning, or high-wind conditions.
- Areas with heavy boat traffic.
What is the weight limit?
- Rectangle Dock 480KG or 1,058 lbs
- Square Dock 320KG or 705 lbs.
Can I tow the Tidal Joy behind my boat?
No, this is not intended to be towed behind any motorized watercrafts.
How should I clean my Tidal Joy?
- Rinse with fresh water after use and remove dirt or sand before stowing.
- Clean with mild soap only.
- Do not use harsh chemicals.
- Allow to dry fully before storage.
How should I store my Tidal Joy?
- Use pump to remove all air and replace inflation port cap.
- Roll tightly and fold to fit back in carry bag.
- Store clean and completely dry in the carry bag.
I think there may be a leak in Tidal Joy--what do I do?
* PVC adhesive required for repairs is not included and must be purchased separately.Find the leak using soapy water or by listening for escaping air.
Fully deflate the board and clean/dry the area around the hole.
Cut a patch slightly larger than the puncture.
Apply PVC adhesive to both the patch and the board; let it get tacky (1–2 min).
Press patch firmly over the hole, removing any air bubbles.
Weight it down and let cure for 12–24 hours.
Reinflate and test to confirm the seal holds.