Dryside Lounger Inflatable Set Up and Care

Dryside Lounger Float – Setup & Deflation Guide

Inflation

1. Lay out the float
   Place the float on a flat, dry surface with the seating area facing up.
2. Open access flaps
   Locate and open the rear flaps to access both air chambers:
   • Seat chamber (bottom)
   • Backrest chamber (top)
3. Open the valve
   Pull the tab on the transparent plug to open.
   Do not remove the black valve during inflation.
4. Inflate the seat chamber
   Insert the pump nozzle into the valve and inflate to a firm, comfortable level.
   Remove the pump and firmly press the transparent plug back into place. Close the flap.
5. Inflate the backrest chamber
   Repeat the same steps for the backrest chamber.

Deflation

1. Open access flaps
   Open the rear flaps to expose both valves.
2. Open valves fully
   Remove both the transparent plug and black valve from each chamber.
3. Release air
   Gently press on the float to push air out. Avoid twisting or excessive force.
4. Prepare for storage
   Reinsert the black valves and transparent plugs after deflation.

Tips

• Use an air pump for faster, more consistent inflation
• Avoid overinflation, especially in direct sunlight
• Ensure the float is completely dry before storing
• Weight Limit: 400 lbs.

Step-by-step with photos: