Step 1: Prepare the Chaise
Lay your chaise flat on a clean, dry surface with the mesh bottom side facing up.
Unzip the fabric cover on both sides to reveal the puncture-resistant PVC core.
Make sure the PVC core is snug and aligned with the corners of the fabric cover.
Zip the fabric cover back up.
Step 2: Inflate the PVC Core
Locate the Velcro window on the back of the chaise’s fabric cover and open it.
Remove the top screw valve from the PVC core.
Insert the nozzle of the included inflation pump into the valve (see Fig. 1).
Inflate until you reach your desired firmness.
Step 3: Seal & Adjust
Firmly close the top screw valve.
Close the Velcro window to secure it.
Double-check that all valves are screwed tightly before using.
Smooth or adjust any creases in the fabric cover as needed.