Ways to Use It
The Chair: Fold the chair upright and lean the back against a wall or sturdy surface to create a supportive seat and backrest. Adjust the foam fill as needed for a structured, cushiony sit.
The Lounger: Rotate onto its side with the cover's seam facing up. Tuck the top front corner inward to form a seat. Adjust the top fabric to create a relaxed lounging shape.
The Floor Pillow: Lay the chair flat and spread the foam evenly inside the cover. Perfect for stretching out or low-to-the-ground lounging.
Assembly Instructions
- Remove the foam-filled insert from the box.
- Carefully cut open the vacuum-sealed plastic bag and remove the foam-filled insert. Caution, take care while opening: use scissors to carefully cut open the plastic. Start with a small puncture in the wrapping, then insert the lower blade of the scissors into the opening and cut slowly while keeping the blade angled slightly upward to avoid cutting the fabric.
- Remove the foam-filled insert from the vacuum-sealed plastic bag.
- Immediately place the foam insert inside the fabric cover before the insert fully expands.
- Use the cover to shape the insert. Fit the corners of the foam insert into the matching corners of the fabric cover, then work the remaining insert into the cover.
- Tip the Turnabout chair onto its side.
- While pinching both sides of the zipper track together, pull the zipper head all the way to the end.
- Confirm the zipper is fully closed before using the Turnabout chair.
- Shake, toss lightly, and press the chair to help distribute the foam evenly inside the cover.
- Allow the insert to finish expanding inside the zipped fabric cover.
Good Things Come to Those Who Wait
Your Turnabout chair may take up to 72 hours to reach its full, fluffy shape. It may look wrinkled or uneven at first; this is normal while the foam expands and fills in. For best comfort, continue to shake, toss lightly, and press the chair as needed to help break apart foam pieces and encourage even expansion. Whenever your chair needs a pick-me-up, simply toss it around to help revive it.
Washing & Fabric Care
Unzip the cover and remove it from the chair insert. Brush off loose dirt, then launder at cold temperature with mild detergent on gentle cycle. Do not bleach. Allow to air dry. The chair insert is spot clean only.
Need a Hand?
If you need further assistance, please submit a support ticket and our team will be happy to help.